Vaportech Morpheus V2

Morpheus V2 Tank Instruction Card

  • Kit Contains:
  • 1x Complete Morpheus V2 Tank
  • 1x Replacement Coil
  • 1x Information Card

Morpheus V2 Tank Features

  • Built with 304 SS (Food Grade) and Pyrex Glass
  • Chic metal casing on glass for protection and durability
  • Tip with air holes for cooling hot vapor
  • Airflow Control: Dual side airflow and single side airflow option
  • 4 ML Liquid Capacity
  • Innovative display box

Morpheus V2 Coil Features

  • Coils Made of 100% Japanese Organic Cotton
  • Morpheus regular coils are available in 1.0, 0.5 and 0.2 ohm option
  • Morpheus Nickel coils are available in 0.1 and 0.15 ohm option
  • 1.0 ohm (20W to 40W), 0.5 ohm (30W to 55W), 0.2 ohm (45W to 75W), 0.15 ohm Nickel (30W to 60W), 0.1 ohm Nickel (65W to 110W)
  • Smooth airflow function
  • Two 13mm air holes on opposite sides which operate together for maximum airflow
  • One 11mm air hole on adjacent side to be opened separately for controlled airflow.

Initial Setup

  • Remove tank from packaging.
  • Unscrew AFC (Airflow Control) base by rotating counterclockwise from tank section.
  • Take your chosen e-liquid and place 5-7 drops of e-liquid into the atomizer head. Wait 30 seconds to make sure the wicking material is completely saturated. IMPORTANT! DO NOT DRY BURN! COIL IS MADE FROM COTTON! IF YOU FIRE THIS WITHOUT FIRST PRIMING YOUR COIL HEAD WILL BURN IMMEDIATELY!
  • Take and fill e-liquid into the tank section. Make sure no liquid enters the center pipe of the tank.
  • Screw the AFC base back into the tank section clockwise.
  • Reconnect tank to your device’s 510 connection
  • Enjoy your new Morpheus V2 tank system created by the fine folks at Vapor Tech.