Vaportech Morpheus SF Tank

Morpheus SF (Side Fill) Tank By Vapor Tech

Morpheus Side Fill Tank is a step forward in the evolution of the popular Morpheus line by Vapor Tech.

In addition to the enhanced adjustable airflow, improved tank capacity of 4.5 ml and RDA deck - the Morpheus SF provides the much desired side fill option.

The improved adjustable airflow allows users more precision, reduced overheating of coils and less dip in flavor if users optfor more airflow.



MORPHEUS SF TANK

By incorporating a side rotating filling ring in the tank’s design, Vapor Tech has removed the hassle of unscrewing the top or bottom for refills when it comes to the Morpheus SF. Keeping in mind the increased tank capacity of 4.5ml – this tank is truly user friendly.



And did we mention the RDA deck?

The Morpheus SF tank is used with the Morpheus sub ohm coils available in stainless steel, Ni200, nichrome80 and ceramic coated wires.



Morpheus SF Tank Package Contains



  • 1 x Complete Morpheus SF Tank System.
  • 1 x 0.25 ohm SS316.
  • 1 x 0.5 ohm Ceramic Coated Coil.
  • 1 x RBA Base.
  • 1 x Manual.
  • 1 x Warranty Card.

Features and Specifications

  • Multiple wire and resistance options for coil heads.
  • 0.2 ohm Ni200 (ONLY FOR USE IN DEVICES SAFE FOR SUBOHM RESISTANCES) Manufactured using Pure Nickel wire - Works Great on Temp Control Mods.
  • 0.25 ohm SS316L - 30W-80W (ONLY FOR USE IN DEVICES SAFE FOR SUBOHM RESISTANCES).
  • 0.5 ohm Nichrome80 - 30W-60W (ONLY FOR USE IN DEVICES SAFE FOR SUBOHM RESISTANCES).
  • 0.5 ohm Ceramic Coated - 40W - 60W (ONLY FOR USE IN DEVICES SAFE FOR SUBOHM RESISTANCES).
  • 0.9 ohm Ceramic Coated - 25W - 45W (ONLY FOR USE IN DEVICES SAFE FOR SUBOHM RESISTANCES).
  • 4.5ML Tank Capacity.
  • Easy Side filling without unscrewing top or bottom.
  • Uses Morpheus coils with new ceramic coated and SS option. Coils can also be used in Aspire Atlantis and Triton tanks.
  • High quality Japanese Organic Cotton to provide a clean and pure taste.
  • Manufactured from Pyrex glass and 304 SS (Food Grade).
  • Top-tip airflow option for a cool vape.
  • Four option bottom Air flow.
  • Easy build Re-buildable Atomizer Base.

Initial Setup

  • Remove the tank from packaging.
  • Unscrew AFC (Airflow Control) base by rotating counterclockwise from tank section.
  • Take your chosen e-liquid and pour 5-7 dropsof e-liquid into the atomizer head. Wait 30 se-condsto make sure the wicking material is completely saturated.

    IMPORTANT! DO NOT DRY BURN! COIL IS MADE FROM COTTON! IF YOU FIRE THIS WITHOUT PRIMING YOUR COIL HEAD WILL BURN IMMEDIATELY!

  • Fill the tank with e-liquid. You can do this while the base is unscrewed or by screwing back the base and using the side filling hole. Make sure no liquid enters the center pipe of the tank.
  • Screw the AFC base back onto the tank section clockwise.
  • Reconnect tank to your device’s 510 connection.
  • To Refill the tank just rotate the side filling ring and fill through the hole. The pictures at the bottom shows how to refill tank without any hassle.
  • Enjoy your Morpheus SF tank system created by the fine folks at Vapor Tech.